comfort basic - our basic RIC fitting is the ideal choice for fittings for all types of hearing loss. This earmold can be combined with all supports, and its matte polished, cost-effective surface gives it a stylish elegance. We manufacture comfort basic from rigid acrylate. The product undergoes the same careful process as a classic comfort earmold made from rigid material. The only difference is that we omit the elaborate surface finishing at the end.
comfort basic is our answer to the numerous customer requests for an economy product with all supports. Therefore, comfort basic combines the form and function of a classic comfort earmold with with a useful standard feature. It is thus the ideal product for all those who want to do without a high polished surface - but never compromise on the highest quality and best wearing comfort.
S 1,5 x 2,5 mm M 2,0 x 3,1 mm (standard) M 2,0 x 3,1 mm with anchor part L 2,0 x 3,4 mm XL 2,0 x 4 mm
Drytube
M 2,0 x 3,0 mm L 2,0 x 3,5 mm
Angle S M (standard) Angles are not glued but included. Selectable for comfort and comfort basic.
Slimtube
For Slimtube systems, please include the corresponding tube for assembly - otherwise, we will drill it as standard, so that almost any system can be mounted later.
easy to insert and remove, durable, dirt-repellent, easy to clean, break-resistant
CLASSIFICATION Directive 93/42/EEC (medical device class IIa)
Clear as crystal.
This highly transparent material is processed energy-efficiently using direct 3D printing and is characterised by high stability and excellent UV resistance. Earmolds made from light-curing 3D acrylate have a high elongation at break and do not become brittle. They are robust, particularly easy to care for and fulfil the highest aesthetic demands. Available in three colors. All rigid earmolds are ground, compacted and polished to a high gloss in our 3-stage vibratory grinding process. The homogeneous surface treatment is a process that is coordinated in detail, because it is only through the right setting and the perfect "recipe" that our extremely break-resistant earmoulds with dirt-repellent surfaces and a brilliant high-gloss finish are created. The validated and standardised mass finishing process ensures a reproducible precision finish with a high surface quality for every single earmould. Our basic products are made from the same materials and undergo the same high-quality process. Only the final step, polishing, is omitted. A lacquered or glazed surface can be ordered as an option for an additional charge.
We also always design our retentions for BTE earmolds according to the following principle: The right fixation for every anatomy - as little as possible, as much as necessary. All functional edges are additionally processed after digital modelling and optimized down to the smallest detail by our bachmaier® grinding. This gives our products their incomparable momentum.
without
This type of fixation sits deep in the ear canal and is therefore almost invisible in the ear.
Hold in the ear
Visibility in ear
Short hook
This minimalist support covers very little of the ear, is hardly visible and provides reliable hold.
Hold in the ear
Visibility in ear
Long hook
The holding points of the long hook are located in the lower concha and cymba area and provide additional hold.
Hold in the ear
Visibility in ear
Claw
The claw shape provides a secure grip thanks to its holding points in the cymba and on the antitragus.
Hold in the ear
Visibility in ear
Ring
This ring-shaped support uses all the holding points of the auricle, has good heat dissipation and allows easy insertion and removal.
Hold in the ear
Visibility in ear
Shell
The shell provides the most secure fit and the highest seal in the ear due to its large contact area.
Hold in the ear
Visibility in ear
Venting
We supplement our ventings with three additional options.
Normal
Additional waxing on the tragus increases the seal.
Graded (Stepvent)
Additional waxing on the tragus increases the seal.
Separate
A ventilation hole is drilled above and below the receiver hole.
Extension for all vents
With this option, the ventings can be easily enlarged during the fitting process. We place the appropriate holes in advance to simplify post-processing.
Couplings
Sound tube
S 1,5 x 2,5 mm
M 2,0 x 3,1 mm (standard)
M 2,0 x 3,1 mm with anchor part
L 2,0 x 3,4 mm
XL 2,0 x 4,0 mm
As standard, we use the acoustic tube in size M - for very small ears, we install the tube in size S.
Angle
S
M (standard)
Angles are not glued but included. Selectable for comfort and comfort basic.
Slimtube
For Slimtube systems, please include the corresponding tube for assembly - otherwise, we will drill it as standard, so that almost any system can be mounted later.
Drytube
M 2,0 x 3,0 mm L 2,0 x 3,5 mm
Ear canal length
For various audiological and anatomical conditions, you can choose between three lengths.
Short Ends between the first and second bend. Medium Ends at the second bend. (standard) Long Ends beyond the second bend.
Length Cymba
This option affects the fit of an RIC earmold. You can choose between three lengths.
Short For sensitive customers or challenging anatomies. Provides minimal retention. Medium Normal retention. (standard) Long Strong retention.
Extras
Connector for air ball
This option makes drying and blowing out an earmold much easier. The end of the vent is provided with a hole adapted to the air ball. This means that the air ball can be attached quickly and easily after cleaning the earmolds.
Earwax recess
Earwax can accumulate in this small, funnel-shaped depression between the sound and ventilation ducts. This prevents blockages and soiling of the holes.
Desired laser engraving
In addition to the serial number, we engrave a name of your choice or an individual number on the earmold. Up to 11 characters are possible.
